Kingston 4GB, DDR4, 2666MHz (PC4-21300), CL19, DIMM Memory

£26.99
In stock
Only 5 left
SKU
KVR26N19S6/4
    Add to Compare Add to Wish List
    Key Features

    Product Details

    Capacity 4GB (1 X 4GB)
    Memory Model  Kingston Value RAM
    Bus Type PC4-21300
    Rank Single Rank
    Memory Type DDR4
    Memory Speed 2666MHz
    Pins 288-Pins
    Voltage 1.2V
    Data Integrity Check Non-ECC Unbuffered
    CAS Latency CL19
    Package Weight 0.025 Kg
    Warranty Lifetime
     
     
     
    This document describes ValueRAM's KVR26N19S6/4 is a 512M x 64-bit (4GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx16, memory module, based on four 512M x 16-bit FBGA components. The SPD is programmed to JEDEC standard  latency DDR4-2666 timing of 19-19-19 at 1.2V. Each 288-pin DIMM uses gold contact fingers. 
     
     
    • Power Supply: VDD = 1.2V Typical
    • VDDQ = 1.2V Typical
    • VPP = 2.5V Typical
    • VDDSPD = 2.2V to 3.6V
    • Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
    • Low-power auto self refresh (LPASR)
    • Data bus inversion (DBI) for data bus
    • On-die VREFDQ generation and calibration
    • Single-rank
    • On-board I2 serial presence-detect (SPD) EEPROM
    • 8 internal banks; 2 groups of 4 banks each
    • Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
    • Selectable BC4 or BL8 on-the-fly (OTF)
    • Fly-by topology
    • Terminated control command and address bus
    • PCB: Height 1.23” (31.25mm)
    • RoHS Compliant and Halogen-Free
    More Information
    Refurbished No
    Condition Brand New
    Write Your Own Review
    You're reviewing:Kingston 4GB, DDR4, 2666MHz (PC4-21300), CL19, DIMM Memory
    Back to Top

    Kingston 4GB, DDR4, 2666MHz (PC4-21300), CL19, DIMM Memory

    £26.99