Kingston 4GB DDR3 1600MHz (PC3-12800) CL11 SODIMM Memory

£45.99

In stock

Only 5 left

SKU

KVR16LS11/4

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Add to Compare Add to Wish List

Key Features

Product Detail ValueRAM's 512M x 64-bit (4GB) DDR3L-1600 CL11 SDRAM (Synchronous DRAM), 1Rx8, low voltage, memory module, based on eight 512M x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1600 timing of 11-11-11 at 1.35V or 1.5V. This 204-pin SODIMM uses gold contact fingers.
Capacity	4GB
Memory Model	Kingston ValueRAM
Rank	R1 Single Rank
Memory Type	SODIMM
Compliance	PC3-12800
Error Correction	Non-ECC Unbuffered
Memory Speed	1600MHz
CAS Latency	CL11
Warranty	Lifetime

Features

• JEDEC standard 1.5V (1.425V ~1.575V) Power Supply

• VDDQ = 1.5V (1.425V ~ 1.575V)

• 800MHz fCK for 1600Mb/sec/pin

• 8 independent internal bank

• Programmable CAS Latency: 11, 10, 9, 8, 7, 6

• Programmable Additive Latency: 0, CL - 2, or CL - 1 clock

• 8-bit pre-fetch

• Burst Length: 8 (Interleave without any limit, sequential withstarting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write

[either on the fly using A12 or MRS]

• Bi-directional Differential Data Strobe

• Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)

• On Die Termination using ODT pin

• Average Refresh Period 7.8us at lower than TCASE 85°C 3.9us at 85°C < TCASE < 95°C

• Asynchronous Reset

• PCB : Height 1.180” (30.00mm), double sided component